Runshi domestic general-purpose operational amplifier provid

General purpose operational amplifier series products are characterized by stable gain and ultra-low input bias current. Provide low-voltage operation and rail to rail input and output. These devices are ideal for sensor interfaces, active filters, and portable applications. Under logic control, the amplifier can be switched from normal operation to less than 1 μ A standby current. Moreover, this series of products use 2.5V to 5.5V single power supply or dual power supply, and the rated temperature range is - 40 ℃ to+125 ° C.

The series models are:

Bandwidth: 150kHz, conversion rate: 0.05V/ μ s. The typical Vos values are 0.8mV RS121, RS122, RS124, RS121S, RS122S series, and RS121S/RS122S with shutdown mode.

Bandwidth: 500kHz, conversion rate: 0.05V/ μ s. The typical Vos values are 0.8mV RS221, RS222, RS224, RS221S, RS222S series, and RS121S/RS122S with shutdown mode.

Bandwidth: 1.1MHz, conversion rate: 0.05V/ μ s. The typical Vos values are 0.8mV RS321, RS358, RS324, RS321S, RS358S series, and RS321S/RS358S with shutdown mode.

Bandwidth: 1.1MHz, conversion rate: 0.05V/ μ s. The typical Vos values are 0.6mV RS6331, RS6332, RS6334, RS6331S, RS6332S series, and RS6331S/RS6332S with shutdown mode.

characteristic:

• Input voltage range: - 0.1V to+5.6V, Vs=5.5V

• Power supply range:+2.5V to+5.5V

• Maximum rated temperature is+125 ° C

• Micro package: SOT23-5, SOT23-6

Application:

• Sensor

• Photodiode amplification

• Active filter

• Test equipment

• Drive A/D converter